               * * * * * BP Microsystems * * * * *

Instructions for Making the BP Software Installations Diskettes

To make the BP software installation diskettes,  you will need 2 formatted floppy disks. Label the disks , Disk 1 and Disk 2 - Install .  Disk 2 is used first and will have the install program.  After downloading bp_disk.exe from our BBS (713-688-9283) follow these instructions: 

1.  Type bp_disk at the DOS prompt and the files you need will be unzipped.

2.  Type MAKEDISK at the DOS prompt and follow the instructions as they are printed on the screen.

3.  You will be asked to select the correct letter for your floppy drive, a: or b:.

4.  Insert  Disk 1 when prompted.

5.  Insert  Disk 2 when prompted.

6.  This completes making of the installation diskettes.

Instructions for Installing the BP.exe Software

1. Select the drive and directory where you would like the BP software to be installed. 

	For example, if you want to install the software in c:\bp, make sure your
	current directory is c:\bp.  You can do that by typing the following at the DOS
	prompt:	c:
			cd\bp

2. Insert the diskette labeled "Disk2 - Install".

3. Type install at the DOS prompt and follow the instructions as they are printed to the screen.

